Cordless Screwdrivers

DEWALT DCK210S2 12-Volt Max Screwdriver / Impact Driver Combo Kit

• The maximum initial voltage on 12-volt max batteries (measured without a workload) is 12-volts. Measured under a workload, nominal voltage is 10.8.
• DCF610 12V MAX* screwdriver features 1/4-inch one hand loading hex chuck
• DCF815 12V MAX* 1/4-inch impact driver features 3 LED lights to provide visibility without shadows

Model No. DCF610 12V MAX* screwdriver features 1 4” 1 hand loading hex chuck. Model No. DCF815 12V MAX* 1 4” impact driver features 3 LED lights to provide visibility without shadows. Kit also includes (2) 12V MAX* lithium ion battery packs, fast charger, and 2 bit tips.The DEWALT 12-Volt Max Screwdriver/Impact Driver Combo Kit offers two compact, efficient drivers in one kit. Both drivers are 6-1/4 inches long and weigh 2.2 pounds, making them easy to maneuver in small spaces. Each driver has convenient features like shadow-free LED lighting, one-handed loading, and a belt clip. The 1/4-inch chucks can be loaded with one hand, and take bits up to 1 inch. Part of DEWALT’s compact line of 12-volt rechargeable tools, these drivers use 12-volt max lithium-ion battery packs that offer 1.1 Ah.

12-Volt Max Screwdriver/Impact Driver Combo Kit At a Glance: Compact 6-1/4-inch bodies for greater maneuverability Powerful 12-volt, 1.1 Ah lithium-ion battery packs Multiple barrel-mounted LEDs eliminate shadows Impact driver has 79 inch-pounds of torque; screwdriver has 160-unit-watt output Three-year limited warranty; one-year free service contract

The compact size offers maximum leverage in tight quarters. View larger.

A lightweight motor and ergonomic body make for easy all day use. View larger.

Compact Design with Built-In LEDs
Because of their compact design, these drivers will fit into small spaces where traditional drill/drivers don’t. As a result, you get straight penetration and avoid damaging screw heads from angled driving attempts. Additionally, three LEDs–mounted radially around the barrel–will light your target area for better visibility.

The size of the drivers also means you can get maximum leverage in smaller spaces, enabling you to make the most of the screwdriver’s 160-unit-watt output or the impact driver’s 79 inch-pounds of torque.

Lightweight Body with User-Friendly Features
With 2.2 pounds distributed evenly between the ergonomic body and compact battery pack, these drivers are easy to lift and handle. The 1/4-inch chucks can be loaded with one hand, and take bits up to 1 inch. Each driver features a built-in belt clip, multiple torque settings, variable speed, and reverse for additional ease of use.

Quick-Charging, Long-Lasting Battery Packs
This kit comes with two 12-volt max lithium-ion battery packs, each with 1.1 Ah. The recharge time of these battery packs is between 30 minutes and 1 hour.

Warranty Information
This DEWALT tool comes with a three-year limited warranty, a one-year free service contract, and a 90-day money-back guarantee.

What’s in the Box
Screwdriver, impact driver, two lithium-ion battery packs, charger, two bit tips, two belt clips, and bag.

The kit features two drivers, two battery packs, a charger, and a contractor’s bag.

List Price: $ 357.44

Price: $ 357.44

Find More Cordless Screwdrivers Products

Black & Decker VPX1201 Li-Ion VPX 7-volt Drill Driver

• Ideal for a range of craft, repair, and fastening jobs
• Compact, lightweight, and comfortable to hold
• Two-speed transmission; eight-position adjustable clutch
• Weighs 2.0-pounds; 2-year warranty
• Includes two accessories

VPX Drill

With its compact, lightweight design, the VPX1201 is small enough to store easily in a drawer or tool box.

The VPX1201 is light and easy to maneuver, but powerful enough to take on tough home improvement tasks.

Take on tight locations or awkward corners with ease.

Introducing the VPX Lithium-Ion Battery System
Black & Decker’s advanced, powerful VPX system guarantees the convenience of a rechargeable battery with maximum versatility. At the center of the VPX system is the 7-volt high-energy VPX rechargeable battery, which features breakthrough lithium-ion technology to generate more energy in a smaller package. The end result is a battery that’s super-compact and 60-percent lighter than Black & Decker’s Ni-Cad power tool batteries. And the VPX holds a charge longer, too — so it’s ready to work whenever you are.

With its versatile design and Black & Decker exclusive technology, a VPX battery is interchangeable with all the products in Black & Decker’s growing VPX line. Swap out one battery for the flashlight, inflator, screwdriver, USB power source, cut saw, or 7-volt drill driver; or double the juice with two batteries to operate the 14-volt drill driver or the hand vac. And of course, every VXP battery and compatible product features the rugged, dependable construction you expect from an industry leader in home power tools.

About the VPX 7-volt Drill/Driver
This new cordless drill/driver from Black & Decker offers quick grab-and-go drilling when you need to get the job done fast. This small, cordless model is just one more great offering from the revolutionary new VPX interchangeable lithium-ion battery system. Once you get started with the VPX system, it’s easy to expand with other power tools, household devices, and electronic products like this one.

The VPX1201 is a lightweight, compact drill that’s ideal for quick jobs around the house. It features two speeds: a high speed for fastening and assembly applications, and a low speed for drilling and higher torque applications. There’s also an 8-position clutch that allows you to set the torque for driving applications, a variable-speed trigger for added control, and a metal single-sleeve chuck with knurled pattern to help improve gripping. Best of all, it’s powered by a single 7-volt VPX battery that is fully interchangeable with other VPX products.

This drill/driver is a VPX expansion product with the VPX battery and charger sold separately.

Key Technical Specs:

• Operates on one VPX 7-volt lithium-ion battery (sold separately)
• Single sleeve keyless chuck
• 2-speed transmission
• 8-position adjustable clutch

Applications
Use the VPX1201 for any around-the-house project, from assembling furniture, hanging pictures, installing blinds and more. It’s perfect for all light to mid-duty drilling applications.

Warranty
This VPX product is covered by a two-year warranty from Black & Decker.

What’s in the box:
Black & Decker cordless drill/driver VPX1201. Battery and charger are sold separately.

Black & Decker’s Focus on Performance
Black & Decker is a global marketer and manufacturer of quality products used in and around the home, and it also serves as a major supplier of information systems and services to government and commercial clients worldwide. With products marketed in over 100 countries, Black & Decker holds leading market shares in a variety of industries, and it frequently adds new product lines to its family of power tools, cleaning tools, outdoor power equipment, laser products and more.Designed for light- to medium-duty drilling projects, this 7.0-volt drill/driver from Black & Decker is great for completing a wide range of tasks, from crafts to furniture repair to fastening jobs. Ultra-lightweight and comfortable to handle and hold, the VPX1201 boasts a two-speed transmission for optimum power in both low-speed driving and high-speed drilling modes; an eight-position adjustable clutch for versatility; and a single sleeve, 100-percent metal, keyless chuck to ensure a secure grip. Powered by just one 7.0-volt VPX battery (not included) that holds its charge longer so it’s ready when you are, this two-in-one tool is built to last through years of projects. And because it’s 45 percent smaller than Black & Decker’s 7.0-volt NiCad drill, the VPX1201 is both portable and easy to store. For added convenience, it also comes with a 2-year warranty.

List Price: $ 57.87

Price: $ 57.87

Installing New Kitchen Cabinets
There are few home improvement projects that can be done which will add more value to your property than a kitchen makeover. The price you pay for new kitchen cabinets can be recovered when you go to sell your house. Stock cabinets which are sold at all home improvement stores can be installed by do-it-yourselfers and they will even provide you with a computer design on how to best utilize your space.

Before you purchase cabinets and even think about installation it is important to give a great deal of thought to the new design for your kitchen. Since you are ripping out the old cabinets, you have the ability to start with a clean slate and change all of the things that have bugged you about your current kitchen for years. Do you want more counter space or storage? Is the sink too far from the refrigerator or do you want to hang the microwave over the stove? These are all things that can easily be incorporated into your design.

Once you have figured out where the new cabinets are going to be placed, you can begin to prepare for installation. After the room is gutted, repair any damage to the walls and paint the area that will be visible behind the cabinets. It is much easier to paint before the cabinets are put up and then, if necessary, you can go back and do any touch up work that may be required. With a pencil, draw in where the cabinets are to be installed to serve as a guide for securing them in place. You also want to mark where the studs are in the wall so you know where to place the screws to hold the cabinets in place.

It is best to start by installing the wall cabinets first. Since they are being placed above the base cabinets you will have more room to maneuver. You will need a level for installation, a power screwdriver, dry wall screws, a hammer, shims and a plumb line. Start by using the plumb line to mark a line across the bottom of the wall where the bottom of the wall cabinet will be placed. Next, you want to make a T-brace out of two by fours which you will use to hold the cabinets in place while you are securing them to the wall.

Start installing the upper cabinets in the corner and work your way towards the middle of the room. Each wall cabinet should be secured to the studs in the wall with two screws on top and two on the bottom of the cabinet. Check each cabinet to insure that it is level from side to side and from front to back. If it is not level use shims to balance it out. In addition to securing the cabinets to the wall, each wall cabinet should be screwed into each other. If necessary, use a clamp to hold the cabinets together until the screws can be installed. After finishing on top, work on the bottom cabinets. Once again, it is extremely important to make sure that they are level before securing them to the studs in the wall.

How Secure Is A Garage Opener?
People generally picture the remote control component of the opener, while thinking less about the mechanical component inside of the garage. This makes sense, as the remote is what provides both the ease of use and the security that we associate with garage door openers.

How secure is a garage opener? At first, when there were not many consumers had remote controlled garage door openers, they were not very secure. The transmitter would send a signal at a particular frequency to the receiver mounted on the garage. Eventually, as the garage door opener expanded into suburban neighborhoods, frequency interference became common for a time. One person’s garage door opener would activate a neighbor’s garage door. This led to the creation of more complex signal frequency systems to eliminate the problem, which had the added effect of increasing the difficulty of someone intercepting the signal for nefarious purposes. At this time, each signal sent by a remote is encoded and unique, so that it is nearly impossible to abuse the technology.

The other major component to be aware of is the mechanical door opener located within the garage, above the door. There are different types of garage opener, but none of them actually provide the lifting power for moving the door. The electric motors actually only control how the door moves. The spring system that comes with the door itself is what provides the lifting power. The electric motor still needs power, however, to control the door’s movement. Because it is a motor, a garage opener’s power is measured in horsepower. In general, the heavier the door, the more power is needed to control its movement with ease. Alternating current and direct current are the two energy supply options available for any electric device, and garage openers are no exception. Direct current has several advantages, including the ability to use a backup battery and being significantly quieter.

A belt mechanism can be used to move the door. It will also reduce noise, but it is somewhat more expensive. A chain mechanism can be used to move the door, although the use of chain increases the noise in the garage when it is in use. A screw-drive system uses a large screw to move the door, and a jackscrew, or residential direct drive, can be installed in smaller garages, as it is a smaller unit.

A garage door opener may be more complicated than you once thought. The security features have changed to meet the needs of the times. Throughout the years, they have evolved from being simple, with less variety, to being more complex with more available options. Knowing the options out there will aid you in any decisions you might have to make involving remote controlled garage door openers.

How To Remove And Install The Hp Pavilion Dv9000 Keyboard
In some cases, you should install a new HP Pavilion DV9000 Keyboard ,

when the old laptop keyboard is broken. It is relatively easy for inexperienced users. In this article, I will show my experience for replacing a danaged HP

laptop keyboard . I mentioned the HP Pavilion DV9000 notebook computer because it has the same body and the

instructions for HP Pavilion DV9000 keyboard replacement should be the same for the two models.
Before you begin, remember to power off your laptop, remove the battery and AC adapter. Open the display to the largest range. remove the notebook computer

keyboard cover and base, carefully lift the lid flat head screwdriver. Continue to remove the cap with your fingers.
Remove the two screws. Carefully lifted from the base HP notebook computer keyboard and move it so that you can access the keyboard cable. Keyboard connected

to the motherboard via a flat ribbon cable. Before you can release the cable and remove laptop keyboard, the connector must be unlocked. Be very careful. HP

Pavilion DV9000 keyboard connector is permanently attached to the motherboard. If you accidentally damage the connector, you must replace the entire

motherboard.
See the locked state of the connector. The connector is like opening a door. You can open the connector with your nails. See the same connector locked

position. Now you can exit from the cable connector, and remove the HP Pavilion DV9000 keyboard. Replace damaged a new keyboard.
HP Pavilion DV9000 Keyboard specification:

Item Number : LFHP019KB
Layout : US Layout
Condition : Brand new.Ribbon cable included!
Color : Black
List Price : $ 48.98
Your price : $ 28.96 (Free Shipping from United States!)
We provide a full 1 year warranty and 30-day money back.
We are an experienced group of internet sellers. All of our items are directly purchased by various reputable manufacturers throughout the orld. They have

passed strict quality assurance procedures such as CE, UL, and ISO9001/9002 certifications.

Under scales of production, transaction costs are greatly reduced. Thanks to our sophisticated and vertically integrated supply chain ystem and streamlined

order fulfillment system, we guarantee you will be receiving the highest quality product at the lowest price.

Buy Rare Earth Magnets For Fun Or Function
If you have had the chance to play around with magnets in the past, then you are aware of how ?attractive? they are, however you may not be totally captivated by them until you are precisely aware of how they can impact your everyday life. For instance, it is widely known that just about every working motor contains a rare earth magnet. The same goes for televisions, transformers, vending machines, PC screens and numerous popular gadgets. However, no one can really appreciate the strength behind these magnets until they discover it for themselves. The awesome thing is one can buy rare earth magnets to try experimenting on your own! With a misleading name, rare earth magnets are pretty easy to come by. Truly, they are as popular as tin or lead however, they are made up of two various substances: neodymium or samarium-cobalt. The Neodymium magnets are more powerful as well as more cost efficient than the samarium-cobalt magnets and they are used for various things serving both for amusement and function.

Neodymium magnets are very amusing to play and run experiments on and the best way to do this is by testing the magnet?s power to their limits. Discovering precisely how much weight one rare-earth magnet will sustain can be an astonishing experience. If you have an old PC screen that is lying around the house then you can just plug it in and test the effects of this magnet near the screen. Nevertheless, be careful, you may not want to place the magnet too close to the screen if you do not want to degauss it or toss it in the trash. Numerous individuals buy rare earth magnets just for collecting since they come in various shapes, sizes and strengths. Avid collectors should know that such magnets at very powerful strengths, may be very dangerous, and are known to cause grave injuries like crushed fingers. Nonetheless, if you are careful when collecting these magnets you can have a rewarding pastime.

As well, it is gratifying to buy rare earth magnets to use in a practical way. For instance, a tiny magnet put in your pocket can be used as an improvised but functional utility belt. Rather than putting your screwdriver in your pocket, which can make tears in the lining, you may secure it to your trousers for convenient access just by resting it against on the outside of the pocket containing the magnet. Such powerful magnets may be used to keep your tools up in the garage, anchor stuff to a desk made of metal, or just secure notes onto your fridge. No matter what reason you have purchasing rare earth magnets, surely you will see that the experience is not only rewarding, but educational as well.

Hoover Steamvac Carpet Cleaner – What Are The Features That Make It So Popular?
We all know who will be using the Hoover SteamVac Carpet Cleaner the most around the house! Therefore it needs to be light, easy to move about, have a very practical design and clear operating instructions.

The Hoover SteamVac comes with comprehensive instructions both for assembly and for the operating procedures. To assemble it all you need is a screwdriver and to carefully follow the instructions! Something tells me that the women are actually better at following instructions than us blokes because they are willing to accept that they can’t put things together without the instructions! Makes sense.

The SpinScrub System is patented and involves the use of six counter rotating brushes that are designed for the carpet as well as tiled floors, although there are some modifications needed to go from carpet to tiles.

Cleaning the brushes is an important part of the maintenance of the unit, but they are easy to get at, and removing them is easy too, so that is good.

Obviously the cleaning operation involves heat, but what is an advantage here is that the heat is applied directly to the floor area so there is no unnecessary loss of heat as the Hoover SteamVac goes about its business. In tandem with this is the button operated Clean Surge technique that delivers an extra shot of cleaning solution to heavier soiled areas, so this is finger tip controlled.

The machine has two translucent plastic tanks, one for the clean water and one for the dirty water that is sucked out of the carpet. When cleaning the carpet, being able to see what’s going on is quite impressive – although to some, impressive maybe the wrong word! Perhaps educational might be better.

Some people find the plastic tanks are a bit small, but unfortunately to keep the Hoover SteamVac Carpet cleaner as light as possible, and as maneuverable as possible there has to be a compromise – anyway, it is far and away better than having to have hoses running to and from the unit which would severely restrict its usefulness.

Now the carpet cleaner is run by a powerful 12 amp motor and one thing that has made it popular is there are no belts to change, break or replace.

Attached to the carpet cleaner is a powered, twin brush hand tool for upholstery and stairway cleaning.

The Hoover SteamVac has a long electrical cord which is great for accessibility and its cleaning and suction head is wide so allowing good coverage for each pass. The

Cleaning the machine for storage takes a bit of effort but this is to be expected really. Its lightness and compact design make it easy to store away.

The things that impress people who use the carpet cleaner are its great value for money, strong suction, great cleaning ability, and the fact that the carpet dries quite quickly. With air movement, like from a fan, it takes under two hours.

How do I find a good deal?

Because of its popularity there are many places that sell the Hoover SteamVac Carpet Cleaner, so how can you be sure that you have the right price?

Well there are people out there who have done the work for you, and so saved you oodles of time – better see what they have to say.

Find More Screwdrivers Articles

Washing Machine And Dryer Problems? Repair It Yourself
Washing machines and dryers must be cleaned and maintained on a regular basis to serve you uninterruptedly. Washing machine or dryer repairing is pretty much easy if you the basics of your machine.

The washer cabinet usually must be disassembled for repairs and some maintenance. The washer is attached to both the electric power outlet and to the water supply. Washing machine repair To take away the control panel, remove retaining screws spaced around the panel. They are generally located under a piece of molding or trim that can be pried off. On some machines, you’ll have to remove the back of the control panel, also held by retaining screws, to get at the working parts of the controls. Knobs on the control panel are usually friction-fit and will pull off. Some knobs are held by small setscrews at the base of the knob. Loosen the setscrews with a screwdriver or Allen wrench and pull the knobs straight off the shafts.

To remove the service panel, remove its retaining screws, and then spread an old blanket on the floor to protect the washer’s finish. Make sure the machine and hoses are worn out of water. Tip the washer over on its front or side to gain access through the bottom of the machine. The bottom of the machine generally doesn’t have a service panel because it is usually open.

To remove the top of the cabinet, insert a stiff-bladed putty knife into the joint between the top and side panels and give the knife a rap with your fist. This should release the spring clips so that the top can be removed.
A dryer on the other hand which is a large drum where wet laundry is loaded, can be dissembled and cleaned easily. Dryer repair Remove the back panel; remove a series of screws or bolts that hold the panel to the top and sides of the cabinet. Then remove the lower front panel, pull it away from the bottom of the cabinet. Lift the lower panel up and away. Remove the springs under each side of the lower panel.
To remove the top panel, wedge a stiff-bladed putty knife under the rim of the top and pry the top off. The putty knife helps release several spring fasteners at the top of the cabinet sides and front. Remove the dryer’s control panel; remove the screws that hold it to the cabinet top or front. These screws may be under a piece of metal or plastic trim; pry off or unscrew the trim. Most knobs are friction-fit; pull them straight out.
There are several complicated parts and that varies from machine to machine. It is always good to keep you manual with you before you start your washing machine or dryer repair.

More Screwdrivers Articles

9 Things Need To Be Considered When Building Your Own Computer
It is a great idea of planning to build your own computer. And if you can follow these simple guidelines, things will become much easier.

1. The first thing is that you should make your workstation with enough room and good lighting. Whether you decide to use it, make sure putting things all in their order. And you can use newspapers to avoid scratches. It may easily for the PC cases and their components to scratch the table, because it always has sharp metal points. Make sure you have adequate lighting. A desk lamp may be fantastic, you can adjust the light towards the appropriate angle when you doing some work.

2. The second thing you need to consider is that, you should make sure all your computer assembly parts are available before you starting to build your computer. Or it’s very easy to forget essential parts of the system. You may wonder why your PC is not working only to find you have skipped a simple cable. So make sure you have all the computer components and manuals.

3. When you handling the components for your PC, you should keep all of them in the packaging that with anti-static function, because the static electricity will destroy the parts easily, especially the ones that you do not use at present time.

4. To read the manual of every computer assembly parts is necessary; to make sure you are putting it in the right place. Treat your components gently. You should know that all the components can only go one way, so if you can not get it, just bring it out, then check the manual, make sure you in the right place.

5. Take the time to read the manual provided for each component, and then tried to install. And eventually, this can save you a lot of time.

6. Do not discard your packaging and receipt after you use the components. There will be few chances happened, I you may have a wrong item, so you need to change them to a right one. And also, when you want to upgrade your components, with the same applies; you may find it become much better to sell again.

7. There will be some extra screws and cables for some Computer Assembly Parts, do not throw them away, just keep it in spare parts cases. You may do not need them at present time. However, you would be surprised how often you would need to look for them in later days.

8. There are a lot of changes that will find it is difficult for you to install a drop screw, so a magnetic screwdriver is a great tool you should own.

9. After assembly, it is very import to check all cables connected very well. It can be very easy for the cable to get loose when working on different components.

Just follow the guidelines, you need not to worry about things broken, even you are the first time for a PC assembly. Most importantly, enjoy the process!

Modern Homes Take Only a Few Days to Build

It is clear in these days of economic downturns around the world that the housing market has taken a bit of a beating. Indeed, those who bought houses that were simply too much for them ended up with something that was valued at less than the money they borrowed to buy it. This negative equity situation has sent people in search of a way to build a home but in a much more economical way and this could just be in the form of a prefabricated building. Modular home prices are within reach of most of us and some people even use these as a second holiday venue or as a way to start a business right there in the back yard.

However, just by having a pre-built set up does not mean that we have to give up on style. Although it is commonly thought that these houses are rather boxy looking, nothing could be further from the truth these days. There are many designs readily available for the buyer, but the manufacturers will alter and redesign the building to make it fit into what the customer wants.

Some people will want to construct a more traditional style place but this can take an inordinate amount of time and cash too.

Difficulties in the finishing materials always seem to rear its ugly head just when the family may be looking forward to the move. Even delays due to inclement weather can add months to the expected finish date so it is important that people take this into account when they start the whole project.

Of course, the wonders of modern technology mean that these prefabricated houses are simply bolted together in a matter of a day or two. Even those who have no construction experience merely have to use a screwdriver and a few other tools to finish the job.

As long as the foundations are professionally finished, the whole thing can be put up very quickly and can be occupied as soon as the furniture is moved in.

Floor plans for these wonderful places are really easy to work out and it is really only the imagination which limits what can be done. Some people will even design the whole place themselves and then leave it up to the manufacturer to interpret these plans in a way that is acceptable to both parties.

Those who are extra clever will surely add in some other extra materials too like stone fire chimneys and breasts. This gives the whole place that look of sustainability which comes with the more traditional place but it really fools the eye since most of the building will be just bolted together.

Of course, since most of the materials are man-made, they are extremely easy to take care of and resistant to pests which would normally eat through wood at an alarming rate. Those parts that are natural, like wood sidings etc, will be pre-treated in the factory so they should be safe right from day one

An Organizational Makeover For Your Home Repair Supplies

Whether you are a proficient do-it-yourself handyman or just need to make the occasional home repair, it’s important to keep your tools and home repair supplies organized and in good order. By storing your tools and supplies properly, you’ll have the peace of mind of knowing that you’ll be able to find them quickly when you have a job to do. Additionally, proper storage of tools and supplies is important to prevent them from becoming damaged. If your home repair supplies could benefit from an organizational makeover, here are a few storage tips that can help.

Organizing Small Hand Tools
Small hand tools such as screwdrivers, wrenches and pliers can sometimes be difficult to keep organized. If you are constantly digging through a box or pile of tools to find just the right one, it’s time to get them better organized. For everyday tools which are used for a variety of home repair jobs, hanging them on a pegboard can be a great way to keep them organized.

However, for tools and supplies that are more specialized, organizing them into separate task-specific toolboxes can be helpful. For example, having a separate plumbing repair or electrical repair toolbox will make it easy to quickly grab all the tools you need for a specific job.

Power Tool Storage Safety
If you have a collection of hand-held power tools, it’s important to store them carefully to prevent damage. A workshop cabinet or shelving unit can make quick work of keeping these tools organized. Storing each power tool in its own basket or container along with its cords, accessories and attachments can go a long way towards staying organized and safe. It’s also important to keep power tools in good repair, such as keeping up on regular maintenance.

Working with improperly sharpened tools or those which have not been adequately lubricated can make using them more difficult, in addition to creating an unsafe situation. As an added bonus, keeping your tools well-maintained will also help them last longer.

Nails, Screws, and Other Small Items
Keeping nails, screws, nuts, bolts and other small home repair accessories organized can often be quite challenging. Small multi-compartment drawer sets, plastic bins, or a collection of boxes with lids can all work well for these small items. Even if you use clear containers that allow you to see the contents, it’s a good idea to label everything carefully. That way, you’ll immediately be able to grab the correct size or length of screw, nail, nut or bolt. Although glass baby food jars are frequently used to organize these items, it is best to avoid glass containers for the sake of safety.

Tool Belts or Aprons
Using a tool belt or apron is often one of the best ways of keeping items close at hand while performing a home repair. In some cases, you might prefer to have separate tool belts for each kind of home repair job. By using this method, you’ll be able to quickly grab your belt and go, without the need to swap tools.